Available in Anthracite, Black, or Serengeti Sand
Helping you save up to 50% when compared to other systems
Lightweight and easy to install and maintain
A1 and A2fl-s1 fire rated, with low surface temperatures
Made from structural grade 6063 T6 aluminium
Clips, screws and supporting subframes are available.
Our software will calculate how many boards and clips you need for our SynergisedTM Decking. Manufactured from structural grade 6063 T6 aluminium with a 100 micron Qualicoat™ premium powder coating for long lasting & low maintenance solutions.
Start calculatingThe Synergised range of aluminium deck products has been tested by the UK’s leading fire test centre to EN 13823, EN 13501 and EN ISO 1716. All elements of the Synergised System achieve Euroclass Classifications of A1 and A2fl-s1.
Synergised aluminium decking systems have been independently tested at the UK’s Premier fire testing centre and comply with EN13823, EN13501 and EN ISO 1716 and achieves a minimum of A2fl-s1 which satisfies all current and proposed legal requirements. Fire Test Certificate.
Our aluminium decking systems have been designed for ease of use and speed of installation. Using our unique stainless-steel hidden clip fixing system Synergised deck boards can be quickly and easily affixed to aluminium, polymer, or timber subframes.
Synergised aluminium deck boards can be cut using a standard chop saw with an appropriate blade fitted. Smaller cuts can be achieved using a hacksaw or jig saw. Spray touch up paints are available to finish cut edges in all our colours.
Synergised aluminium decking is a great conductor of heat and will remain significantly cooler than similar colours in other decking materials such as composites and timber. (Click here to view comparison chart)
Synergised aluminium deck boards are powder coated using a Qualicoat approved system and will fade at a rate less than 3 Delta E. A figure between 0-4 Delta E fade resistance is classed as excellent.
No, Synergised aluminium decking has undergone the following stringent tests and results show its one of the best anti-slip finishes on the market today.
Shod Ramp test to CEN/TS 16165, annex B and DIN 51130 Rated R12 Sliding Friction Co-efficient: Tribometer test CEN16165, annex D and DIN51131 Anti-slip Pendulum test to BS7976-2 Dry and Wet (Click here to view charts)
Without a doubt our Synergised aluminium subframe is the preferred option when fire certification is required. Aluminium is roughly 3 times stronger than wood. Timber or polymer subframes can be used for low level (Below 18 metres in height) or domestic applications if a lower cost option is required. For commercial applications we would always recommend the aluminium system.
Warm soapy water and a stiff broom will normally suffice.
Yes you can order a sample here https://aluminiumdecks.co.uk/free-samples/
With all deck boards there is almost always some wastage where boards have to be cut to length. Joists are some distance apart and boards have to be supported at both ends, so often have to be cut to size. Normally we would recommend that you allow 5%-10% for this purpose. It is important to make sure that you always have enough boards to complete your project as different batches may be slightly different. Also if you are wanting to put boards diagonally, we would suggest that you require an extra 15% for this purpose.